M645 Multi-Moulder is a versatile moulding machine,
capable of handling many different kinds of results. From simple,
straight mouldings, curved mouldings, circular mouldings, to
bar rails and stairs, the MIKRON M645 is designed to meet your
most demanding requirements. Create completely new moulding
styles or use the MIKRON M645 to match existing mouldings—including
restorations to original architectural moulding styles designed
over the last several hundred years. There is no limit to its
MIKRON M645 Multi-Moulder is a powerful machine that is designed
to provide its owners with an extensive array of capabilities. See
the below Features for complete information.
MIKRON M645 is a solidly built unit using a revolutionary approach
to forming complex mouldings safely and accurately. Featuring a
patented adjustable tilting-arbor head and floating tabletop, a
variable speed feed motor and a precise tracking system, you can
produce circles, ellipses, stair parts, curved crowns, bar rails
and of course, straight mouldings up to 6" wide, with the greatest
are machines with vertical tilting spindles and power feed, but
the MIKRON M645 is the first and only horizontal tilting spindle
and feed system for curved and elliptical mouldings, combined into
manually tiltable spindle from 0° to 52°! MIKRON
has re-engineered the tilt system so that customers can now reach
up to 52°, which the marketplace is demanding for crown mouldings,
and many other applications. This new feature is standard on all
newly manufactured MIKRON M645 Multi-Moulders!
digital readout by Accurate Technology. This is a digital read-out
system which MIKRON can install for you. This is an optional component
that will give you accurate depth of cut every time - within +
or - 0.002" / lin. ft. (+ or - 0.165mm/lin. m).
variable speed feed motor — 0 to 30 feet per minute
premium control unit — MIKRON has redesigned the electrical
units to be more energy efficient and accommodate all voltage
requirements. Now the feed motor runs from the same switch panel
as the cutter head, and the electrical box is installed inside
the base. This is standard on all newly manufactured MIKRON M645
Multi-Moulders! Please specify 220, 440, 480 or 575 voltage requirements
at time of ordering.
separately adjustable feed rollers to enable multiple passes
mechanically adjustable fence for accurate, easy positioning
linear tracking system guides the work piece smoothly and directly
under the cutter head, while keeping it flat
go from straight to curve in just one setup — no accessories
maximum cut is 6" wide by 6-1/2" thick
uses a standard 4" diameter, 2 knife corrugated back cutter
head (1 included)
Your Moulder Do This?
wide x 30" deep x 65" high
(5' min. front to back clearance needed)
wide x 24" deep
diameter, 6" long
to 30 feet per minute (forward and reverse)
= 6-1/2" max.
tilted = 6" max.
Cutterhead direction plus
Feed Roll direction and rate.